A gear partyou can sendto the shop
We are building Gearing Expert as an add-in that turns gear parameters into a part made from native SOLIDWORKS features.
A free trial can be downloaded: 2 gear parts, no time limit, no card. Licences are not sold yet.
- 0.1–50
- Module, mm
- 6–500
- Number of teeth
- 10–35°
- Pressure angle
- −1…+1
- Profile shift
Tooth profiles computed by Gearing Expert: m 2, z 20 and z 12 (x +0.3), α 20°.
Gear types
External spur gears only
The current version makes one gear type. The others below are not in it.
Involute external teeth, one gear per part, built from a sketch and an extrusion.
Not in the current version.
Not in the current version.
Not in the current version.
Not in the current version.
Not in the current version.
Features
What the current version does
This is the first public version, tested by the publisher in SOLIDWORKS 2022. The points below describe what it does; please report any problem to the support address.
External spur gears
Involute spur gears with external teeth. Other gear types are not in the current version.
One parameter window
Module, number of teeth, pressure angle, profile shift and face width in a single window.
Checks before the part is made
Undercut risk and a pointed tooth tip are flagged as soon as a value is entered. Parameters that fail a check do not produce a part.
Native SOLIDWORKS features
The gear is built from a sketch and an extrusion in a new part. The part opens without the add-in installed.
Volume read back
After the part is made, the add-in reads its volume from SOLIDWORKS and shows it next to the expected value.
Involute flanks
Each flank follows the involute calculated from your parameters and is drawn as a spline in the sketch.
Parameters and ranges
| Parameter | Range |
|---|---|
| Module m | 0.1 – 50 mm |
| Number of teeth z | 6 – 500 |
| Pressure angle α | 10° – 35° |
| Profile shift coefficient x | −1 – +1 |
| Face width b | 0.1 – 1000 mm |
Input limits of the current version. A value inside the range can still fail a check, for example undercut risk with few teeth.
Status
Where it stands
Free trial available
The installer can be downloaded from this site and makes 2 gear parts without a licence, with no time limit. Licences cannot be bought yet.
DetailsLicence model decided
Perpetual licence, one seat per licence. One year of updates is included; after that, an optional yearly update plan.
DetailsPrice at release
It will be published with its effective date when the first version ships. Per-seat prices for 1 to 4 seats will appear on this site; 5 or more seats will be quoted on request.
Details
Limits
What it does not do
Read this before you plan around it.
Licence
Licence terms already decided
- Perpetual
- One year of updates included
- One seat per licence
- Several seats
Inspect every model before you use it for manufacturing.
The Expert family
More SOLIDWORKS add-ins from the same publisher
- GLB Expert
Exports SOLIDWORKS parts and assemblies to 3D formats for the web, presentations and sharing.
- Nesting Expert
Turns a SOLIDWORKS assembly into sheet count, material cost and layered DXF.
- Mechanism Expert
Builds known mechanism types from your dimensions as parametric parts and a mated assembly, then checks what it built.
- Springs Expert
Spring design and calculation, generating the geometry straight into the model.
- FAI Expert
Extracts dimensions, tolerances and GD&T from drawings, balloons them and prepares AS9102 and PPAP first article reports.
Assembling Expert
Coming soon